EN
Juhuan 300Ml 500ml 750ml Empty Aerosol Cans Tinplate Empty Aerosol Can for Spray Can
Aerosol can structure:
Depending on the number of parts that make up the can, there are three-piece aerosol cans, two-piece aerosol cans, and integral aerosol cans.
(1) Three-piece aerosol can: It consists of three parts: the can cover, the can body and the can bottom. The can body has a longitudinal weld, also known as a side seam can. The tank body is connected with the tank cover, and the tank body and the tank bottom are connected by a double edge.
(2) Two-piece aerosol can: the can body and the can bottom (or can lid) are combined into one, and then the can lid (or can bottom) is combined into an aerosol can container. The two parts are also connected by a double edge.
(3) Single aerosol can: an aerosol can container that integrates the can body, the can bottom and the bottom cover. The shoulder of the tank is hemispherical, the neck is hemispherical, arc-shaped, conical, etc.
- Overview
- Recommended Products
| Place of Origin | Linyi Shandong, China |
| Brand Name | JUHUAN |
| Product Name | Empty Aerosol Cans |
| Printing | FUJI UV printing lines – 4, 6 and 7 colors |
| Certification | ISO9001, ISO45001, ISO14001， SGS， MSDS |
| Surface Finish | Glossy, semi-matte, full-matte and others |
| Annual capacity | 0.5 billion cans per year |
| Body high | 100-310mm |
| Dimensions | 52mm/57mm/65mm diameter |
| Volume | 300ml; 500ml; 750ml |
| MOQ | 7200pcs |
| Delivery time | 15-25 days |
| pec | normal cans | high pressure cans | ||||
| (US DOT 2P) | (US DOT 2Q) | |||||
| Deformation pressure | 180psig | 1.2 Mpa | 12Bar | 285psig | 1.9 Mpa | 19Bar |
| Burst Pressure | 240psig | 1.65 Mpa | 16.5Bar | 300psig | 2.0 Mpa | 20Bar |
| Thickness | 0.0075in | 0.18mm | 0.18mm | 0.0098in | 0.25mm | 0.25mm |
